Design Freedom

Efficiency

Quality Assurance
Reduced Cost

Print the Parts You Want and Need – Without Compromise

Every aspect of our end-to-end manufacturing solution has been carefully designed to surpass industry standards.

Design Freedom

Design the parts you need without limitations or compromise, significantly shortening time-to-market.

Complex Geometry

With our protrusion tolerant non-contact recoater and underlying Intelligent Fusion processes, the control is so precise, the need to design-in support structures is greatly reduced and often eliminated.

Low Angles, Thin Walls & High Aspect Ratios

We enable extremely low print angles down to 0-degree horizontal overhangs, horizontal inner diameter holes from 100mm+ down to 500 microns, high aspect ratios 6000:1 pins, thin walls down to 150 microns, and down to 15 microns Sa surface finish at 3 degrees for increased part performance.

Optimized Performance

Velo3D’s end-to-end solution ensures lighter, balanced, more durable parts with complex angles for new designs or optimization of replacement parts.

COMPLEX GEOMETRY


Low Angles, Thin Walls & High Aspect Ratios


Optimized Performance


Rapid Production

Responsiveness to demand allows the rapid production of new radical and complex designs, without having to iterate on its manufacturability or develop a manufacturing solution.

Supply Chain Optimization

Leverage our network of contract manufacturing (CM) partners or operate your own Velo3D printers to produce your new or legacy designs at scale through a distributed supply chain. With Velo3D’s part match production, your part can be produced from a single software file with matching accuracy, material properties, and quality control on any Sapphire printer.

Golden Print File

Velo3D’s revolutionary single print file approach enables a part to be printed on any Velo3D printer, anywhere in the world.

That means the geometry and material characteristics are the same for every part, regardless of whether it’s printed in Oklahoma or Osaka, Seville or Stuttgart.

Through this, we’ve built a worldwide network of contract manufacturers who are ready and waiting to lower the transition risk from development to production to rapidly scale your part(s).

Customers own one print file for each project that can be printed on any Velo3D printer across the global contract manufacturing network or your own global facilities.

Photo via Launcher

Repeatability

Responsiveness to demand allows the rapid production of new radical and complex designs, without having to iterate on its manufacturability or develop a new or different manufacturing solution.

Supply Chain Optimization


Golden Print File


Repeatability


Quality Assurance

The gold standard in quality for advanced AM technology, verifiable layer-by-layer.

Every aspect of our end-to-end manufacturing solution has been carefully designed to surpass your requirements and industry standards.

In-situ Quality Assurance

Instant visibility into every layer of the build through real-time sensors, physics-based excursion detection algorithms, and optical measurements.

Printer Health

Velo3D has integrated quality-assured production of parts throughout our product portfolio. From the one-click calibration on the Sapphire family of printers to statistical and deterministic defect detection in Assure.

Operational Performance

Layer-by-Layer Confidence

Assure provides a dashboard that tracks each printer’s health and printer performance metrics. Engineers will be able to focus on utilization trends, system availability data, consumables status, and advanced analytics.

In-situ Quality Assurance


Printer Health


Layer-by-Layer Confidence


Reduced Cost

The efficiency delivered by our end-to-end solution optimizes the entire manufacturing process and helps to reduce cost and maximize outputs.

Speed-To-Market

Removing constraints on what can be produced helps you avoid the downtime associated with re-engineering resulting in faster product development, differentiated products that deliver higher performance, and a lower cost than conventional metal additive manufacturing.

Optimized Printing

Our end-to-end solution removes the traditional challenges and expenses associated with AM manufacturing. Parts can be printed in a way that helps avoid costly post-processing expenses without any sacrifice in design or performance.

Speed-To-Market


Optimized Printing


“Over the past few years, many of our customers have inquired about 3D printing. Velo3D’s ability to create parts without having to design them for additive manufacturing makes it stand out compared to other solutions. Its end-to-end solution is very complimentary to our existing offerings and will allow us to greatly improve the supply chain for our customers.”

Campbell Macpherson – EVP of Advanced Manufacturing – Schoeller-Bleckmann Oilfield (SBO)

Schoeller Bleckmann Oilfield

“This diffuser was the perfect application for additive. When you implement an AM solution to manufacture this kind of part it takes all the complexity away.”

Rolf Meima – Director of Procurement – Siemens Energy

Siemens Energy

“The unique abilities of Velo3D’s next generation technologies will allow us to minimize the re-design of our products for additive while also reducing the barriers associated with traditional metal additive systems on the build setup, maintenance, and supply chain scalability.”

Steve Freitas – R&D Director – IMI Critical Engineering

IMI Critical

“Velo3D really delivered on our turbopump, including its 3D-printed rotating impeller, all of which functioned perfectly the very first time at 30,000 rpm, using the first prototype.”

Max Haot – Founder & CEO – Launcher

Launcher Logo

Do More and Go Further with Velo3D

Schedule a call with an expert to learn how Velo3D can transform your business and solve your engineering challenges.